Patch Panels and miscellaneous buffer modules
Cytec manufactures passive and programmable patch panels for Automated Test, Data Acquisition and communications. The passive patch panels simply allow you to convert between connector types for rack mount wiring and interconnect issues. The programmable patch panels allow you to reconfigure wiring from a computer using Ethernet LAN, GPIB, RS232, USB or other communication protocols.
Don't see what you need? Just ask, we'll build it for you.
Call 1-585-381-4740 or e-mail sales@cytec-ate.com.
Programmable Patch Panels
Relay or Solenoid Driver Chassis
Passive Connector Adapters
Densi-shield Patch Panels
Buffers, Amps, Impedance Match and Conversion Modules
Programmable Patch Panels
16x8 Power Patch Panel
Price:$8,985.00
Product Details
16x8 non-blocking matrix allowing power distribution or interconnects
Max Switched Power: 150 Watts DC, 2,000 VA AC
Max Switched Voltage: ± 308 VAC, 30 V DC
Max Swiched Current: 8 A
Max Carry Current: 10 A
Control with Ethernet LAN, GPIB, RS232 or Manual
5 Year Warranty! Field proven for 30 years.
Click here for a product bulletin.
HiPot Patch Panel
Price: $5,160.00
Product Details
32x1 or 16x2 matrix
Max Switched Power: 200 Watts
Max Switched Voltage:3500 V Peak
Switch Current: 3.0 A
Breakdown Voltage: 7500 V peak, 5250 V rms
Control with Ethernet LAN, GPIB, RS232 and Push Button Manual Controls
5 Year Warranty! Field proven for 25 years.
Click here for a product bulletin.
GX/16 168 wire 1x16 mux
Price: Call or e-mail sales@cytec-ate.com
Product Details
1x8 or 1x16 mux configuration switching 168 wires.
Virgina Panel 168 pin high density connectors.
Cable test, Environmental test, Bus test, Avionics test.
Max Switched Power: 60 Watts
Max Switched Voltage:+/- 110 V Peak
Switch Current: 1.0 A
Breakdown Voltage: 750 V peak, 525 V rms
Control with Ethernet LAN, GPIB, RS232 or Manual
5 Year Warranty! Field proven for 20 years.
Click here for a product bulletin.
Low Leakage 64x1 mux for high resistance / low current measurements
Price: Call or e-mail sales@cytec-ate.com
Product Details
64x1 or 32x2 configuration with BNC connectors.
Measures greater than 10 G ohm resistances, currents down to 100 fA.
Available with driven guards and Triax connectors.
Max Switched Power: 10 Watts
Max Switched Voltage:+/- 100 V Peak
Switch Current: .25 A
Breakdown Voltage: 1250 V peak. Allows for high voltage testing to offset parasitic leakage.
Control with Ethernet LAN, GPIB, RS232 or Manual
5 Year Warranty! Lifetime tech support.
Click here for a product bulletin.
Custom Microwave Switching Systems of all types.
Price: Call or e-mail sales@cytec-ate.com
Product Details
Any configuration or brand of components. We will automate to your design.
DC to 40 GHz, 1 to 1000 control points.
Relays, Programmable Attenuators, Splitters, Combiners, Amps, or any other microwave components.
SMA, N, TNC, 2.92 mm, BNC.
50 or 75 ohm systems ( 75 ohm systems to 2.5 GHz only ).
Systems built to your specifications with little NRE.
Control with Ethernet LAN, GPIB, RS232 or Manual
5 Year Warranty on Cytec equipment, manufactures warranty on microwave components.
Click here for a product bulletin.
Programmable Patch Panels
Relay or Solenoid Driver Chassis
Passive Connector Adapters
Densi-shield Patch Panels
Buffers, Amps, Impedance Match and Conversion Modules
Driver Chassis for relays or solenoids
Build your own computer controlled systems for automated test, data acquisition or communications with a Cytec driver chassis. Control 8 to 8000 external relays, solenoids, programmable attenuators or any other DC activated devices. Simple command sets allow you to control devices from a computer using Ethernet LAN, GPIB, RS232, USB or other communication protocols.
Don't see what you need? Just ask, we'll build it for you.
Call 1-585-381-4740 or e-mail sales@cytec-ate.com.
Or visit our Main Switching System home page at cytec-ate.com
32 channel driver chassis
Price: $2,780.00
Product Details
32 drive channels of current sinks or source
+5, +12, or +28 VDC Linear low noise power supplies.
Front Panel LED Indicators.
Push button manual control.
Diode supression for inductive loads.
10/100 Ethernet LAN, GPIB, RS232 and USB Control
5 Year Warranty! Field proven for 32 years.
Click here for a product bulletin.
64 channel driver chassis
Price: $4,025.00
Product Details
64 drive channels of current sinks or source
+5, +12, or +28 VDC Linear low noise power supplies.
Front Panel LED Indicators.
Thumbwheel selector manual control.
Diode supression for inductive loads.
10/100 Ethernet LAN, GPIB, RS232 and USB Control
5 Year Warranty! Field proven for 32 years.
Click here for a product bulletin.
128 channel driver chassis
Price: $4,905.00
Product Details
128 drive channels of current sinks or source
+5, +12, or +28 VDC Linear low noise power supplies.
Front Panel LED Indicators.
Thumbwheel selector manual control.
Diode supression for inductive loads.
10/100 Ethernet LAN, GPIB, RS232 and USB Control
5 Year Warranty! Field proven for 32 years.
Click here for a product bulletin.
256 channel driver chassis
Price: $6,320.00
Product Details
256 drive channels of current sinks or source
+5, +12, or +28 VDC Linear low noise power supplies.
Front Panel LED Indicators.
Keypad manual control with LCD Display.
Diode supression for inductive loads.
10/100 Ethernet LAN, GPIB, RS232 and USB Control
5 Year Warranty! Field proven for 32 years.
Click here for a product bulletin.
Programmable Patch Panels
Relay or Solenoid Driver Chassis
Passive Connector Adapters
Densi-shield Patch Panels
Buffers, Amps, Impedance Match and Conversion Modules
Passive Connector Adapters
These adapters allow connector conversions to simplfy test or adapt to different equipment connectors. Click the links for details or e-mail us with any questions.
PP/RJ45-SMA-F RJ45 to SMA Adapter
Price: $165.00
Product Details
Convert CAT6A RJ45 Connector to 8 Female SMA Connectors. Adapt Ethernet, DSL, CAT5E, CAT6 or CAT6A to coaxial connectors. Passes all CAT6 testing. Standard EIA/TIA 568 pinout keeps pairs together.
Click here for a product bulletin.
PP/Spacewire-D9-Pin-SMA Socket Adapter
Price: $250.00
Product Details
Convert SpaceWire Mico D9 Pin Connector to 8 Socket SMA Connectors. This test adaptor allows you to look at Spacewire signals on a scope or convert any Micro D9 connector signals to coax SMA. Tested to 500 mbps NRZ. See the schematic of pin-out or call Cytec for options.
Click here for a schematic.
PP16/SMA-M-Triax-XX
Price: $3,850.00
Product Details
16 Channel Differential(+/-) Triax Connectors to 32 Male SMA cables.
Cable length specified by replacing XX in inches in part number.
Labeled per customer specs.
Click here for a drawing of the product
PP/32-SMA/BNC-Triax/TBNC Patch Panel
Price: $2,850.00
Product Details
32 Channel Differential(+/-) Triax or TwinBNC to single ended SMA or BNC Patch Panel
Allows you to convert between differential Triax or Twinax or Twin BNC connectors to single end SMA or BNC connectors.
Click here for a drawing of the product
PP16/D37-75ohm-BNC Patch Panel
Price: $950.00
Product Details
16 Channel Single ended D37 to 75 ohm BNC Patch Panel
Allows you to convert between 16 single ended 75 ohm signals on a D37 Connector to individual BNC coax connectors.
Data rates to 50 Mbps or 80 Mhz. Originally intended for 75 Ohm TTL signals but works in many applications.
Click here for a drawing of the productProgrammable Patch Panels
Relay or Solenoid Driver Chassis
Passive Connector Adapters
Densi-shield Patch Panels
Buffers, Amps, Impedance Match and Conversion Modules
Densi-Shield Patch Panels
Densi-shield Patch Panels allow you to convert many common coax connections to a mass interconnect cable and then convert it back to coax at the other end of the cable. This system can greatly simplify differential signal routing while maintaining the signal integrity over distances of up to 10 meters. The Densi-shield cables are smaller, lighter and more cost effective than bundles of coax and out perform twinax and triax cables.
DensiShield to BNC/SMA Patch Panel
Price: $750.00
Product Details
16 Channel Differential(+/-)
Converts 16 differential pairs to two 8 pair Densi-shield connectors. Signal rates to 800 Mbps NRZ. Matched path lengths. 100 ohm impedance pairs. Custom labeling available.
Click here for a drawing of the productClick here for a product bulletin.
DensiShield to Triax Patch Panel
Price: $1,425.00
Product Details
16 Channel Differential(+/-)
Converts 16 differential pairs to two 8 pair Densi-shield connectors. Signal rates to 800 Mbps NRZ. Matched path lengths. 100 ohm impedance pairs.
Custom labeling available.
Click here for a drawing of the productClick here for a product bulletin.
DensiShield to D-9 Female Patch Panel
Price: $590.00
Product Details
16 Channel Differential(+/-)
Converts 16 differential pairs on Male ( pin ) or Female ( socket ) D9 connectors to two 8 pair Densi-shield connectors. Signal rates to 400 Mbps NRZ. Matched path lengths. 100 ohm impedance pairs. Custom labeling available.
Click here for a drawing of the productClick here for a product bulletin.
Programmable Patch Panels
Relay or Solenoid Driver Chassis
Passive Connector Adapters
Densi-shield Patch Panels
Buffers, Amps, Impedance Match and Conversion Modules
Buffer Modules, Amps, Impedance Matching and Signal Conversion
Useful devices to distribute 50 or 75 ohm signals, amplify signals, convert between 50 and 75 ohms or convert between differential signal types such as RS422, LVDS, ECL, PECL, CML and TTL. Click the links for details or e-mail us with any questions.
or call 1-585-381-4740
75 ohm TTL Buffer Amp Modules
Price: 1x4 Module = $250.00, 1x8 Module = $400.00, Call 585-381-4740 or e-mail
Product Details
1x4, 1x8 or larger 75 ohm TTL amplifier buffer modules that allow signal distribution or restoration.
Amps support + 5 Volt TTL levels into 75 ohms.
Up to 70 Mbps NRZ data rates
Drives into coax cables up to 200 feet long.
Input over voltage and output short protected.
Click here for a product bulletin.
8 Channel Impedance Conversion Amps
Price: $600.00 per module ( 8 channels ), call 585-381-4740 or e-mail for options.
Product Details
8 amplifier channels per board with BNC connectors.
50 to 75 ohm or 75 to 50 ohm conversion ( other impedances possible).
Large signal bandpass ( Up to 5 Vpp ) 150 MHz.
Small Signal bandpass ( less than 2 Vpp ) 500 MHz.
Modules only or installed in aluminum chassis with power (quote per application ).
Click here for a schematicE-mail us for specs or quotes on your application.
8 Channel Adjustable Gain Amp Circuits with BNC connectors
Price: $125.00 per channel
Product Details
8 Channel adjustable gain amps with gain adjust of -60 to +20 dB per channel.
Max V out = +/- 2.2 Volts. Max I out = 120 mA.
150 MHz -3 dB point. Flat response to 40 MHz.
Gain adjust with large and small scale potentiometers.
Click here for a drawing of the productE-mail us for specs or quotes on your application.
8 channel Universal Amp Circuit may be used as summing amps or conversion amps
Price: 4 Channel Amp module = $600.00. 8 Channel Amp module = $900.00
Product Details
8 Channel universal amp module allows for flexible configurations and has protyping area on board.
Max V out = +/- 10 Volts into 100 ohms. Max I out = 130 mA.
Applications include Cable drivers, Video amps, DSL, Pulse amps, Flash ADC.
100 MHz BW ( -3 dB ) at AV = 2, 60 MHz @ AV = 10.
1 V rise times of 5 ns.
Click here for a drawing of the productE-mail us for specs or quotes on your application or call 585-381-4740.
High speed differential signal converters allow you to convert between any of the following:
RS422 -- LVDS -- CML -- ECL -- PECL -- LVPECL
Price: $ priced according to application, connector style and channel count. Call or e-mail.
Product Details
16 channel modules with SMA connectors.
8 channel high density modules with densi shield connectors.
See Densi-shield patch panels for connector options on high density modules.
AC coupled, terminating resistors to user specs.
Too many options to mention here.
E-mail us for specs or quotes on your application.