Cytec Standard Product Lines
Click on the links below to get more information on the product lines, or contact us for help pointing you in the right direction.
Click here for a quick product application guide!
Call us at 585-381-4740, E-mail us at sales@cytec-ate.com or contact a worldwide representative.
CXAR Coax Mux Systems
- DC to 2.5 GHz signals
- BNC, SMA, Triax, Twinax Connectors
- 50 or 75 ohm impedance
- 1x2 to 1xN Mux configurations
- High Voltage / Low Leakage modules
HXV High Voltage / Hi-Pot Systems
- Standard Systems to 7500 Volts Peak
- Custom Systems up to 25KV
- 5 way Binding Posts or Shrouded Banana Jacks
- SHV safety connector options
- 1xN or NxM configurations
LX General Purpose Test Systems
- Mux, Matrix, Discrete configurations
- Low Level to High Power options
- Many connector options
- LED display of latched switches
- Up to 128 switch-points per 2 RU chassis
JX Modular Mux Test Systems
- 1xN Mux configurations up to 1x512 per chassis
- 1 wire, 2 wire or 4 wire configurations
- Cost savings without LED indicators
- Jumpering and backplane configuration options
- Large variety of modules available
CXM Microwave Systems
- DC to 40 GHz
- Many relay options from different vendors.
- Custom systems with low to no NRE
- Panel mounted relays or internal with flange connectors
- Custom systems using other microwave components
RJ Series Telecom Systems
- LAN, WAN, DSL, anything with RJ45 connectors
- 2 to 8 wires with EIA/TIA 568 pin-out
- Meets specs up to CAT6A
- Physical layer switches act like a cable
- Matrix, mux, failsafe configurations
VX General Purpose Test Systems
- Mux, Matrix, Discrete configurations
- Low Level to 1000 Volts
- Many connector options
- LED display of latched switches
- Up to 256 switch-points per 3 RU chassis
DXM Large High Speed Solid State Matrices
- PECL, ECL, RS422, LVDS, LVTTL, CML, Spacewire
- Clock and Data pair configurations
- Data Rates up to 3.2 Gbps NRZ
- Matrix sizes up to 128x128
- High Speed Solid State differential signals
CX Coax Matrix Systems
- DC to 1 GHz signals
- BNC, SMA, Triax, Twinax Connectors
- 50 or 75 ohm impedance
- 2x2 to 16x16 Matrix configurations
- Mechanical relay systems
RS Series D Connector Systems
- D conn. systems switching 9, 15 or 25 wires
- Matrix or Mux configurations
- One-to-one pin-out with either pin or socket
- Data rates up to 50 Mbps
- Custom configurations
HDX Large Physical Matrix Systems
- 1, 2, 4,or 8 Wire Matrices
- Nx4 Matrix up to 512x4
- Nx8 Matrix up to 256x8
- Nx8 Matrix up to 128x16
- Easy to work with D connectors
DX/256x256 Solid State Digital Matrices
- RS422, RS232, TTL or 75 ohm TTL
- Clock and Data pair configurations
- Data Rates up to 80 Mbps NRZ
- Matrix sizes up to 256x256
- Patch Panels for any connector
Patch Panels, Connector Adaptors, Buffers and Amplifiers
- Preconfigured Patch Panel Switching Systems
- Relay or Solenoid Driver Chassis
- Patch Panel Connector Adaptors
- Densi-shield patch panels
- Buffers, Signal Conversion, Amplifiers
Mesa Series Multi-chassis Controller
- Controller for up to 16 switch chassis
- Single point of Control
- Lowers cost on large systems
- Allows for redundant control
- Manual control option
GX Series Group Switch Systems
- Multiplexers switching large groups of signals
- From 25 to 1000 wires in 1xN configurations
- Multiple high density connector options
- Low level, high current, high voltage combos
- Many Custom configurations with low NRE
VDM Video and RF Switches
- Solid State analog Matrix
- 50 or 75 ohm up to 400 MHz
- Video or RF signals
- 8x8 to 32x32 configurations
- Modular design for low MTTR
TX Video and RF Switches
- Solid State analog Matrix
- 50 or 75 ohm up to 140 MHz
- Video or RF signals
- 16x16 to 128x128 configurations
- Modular design for low MTTR
PX Reed Relay Matrix Systems
- Single or two pole
- 2 RU Rack Height
- Nx8 Matrix up to 64x8
- Nx16 Matrix up to 32x16
- BNC, Screw Terminal or Header connectors
FO Passive Fiber Optic Systems
- Single or Multimode
- 1x2, 2x2 or dual versions
- Wavelength independent
- Low loss, high power rating
- Failsafe, latching, options
FX OEO Fiber Optic Systems
- Optical-Electrical-Optical
- Convert between ECL, PECL, CML to Fiber
- Convert fiber back to electrical
- Data rates up to 3.2 Gbps NRZ
- Matrix sizes up to 128x128
VDX Video and RF Switches
- Solid State analog Matrix
- 50, 75, or 100 ohm up to 150 MHz
- Video, Audio or RF signals
- 8x8 to 16x16 configurations
- LAN, RS232, GPIB or Manual Control
Don't see what you need? Just ask! With 40 years of building switches there is a good chance we have it but just don't show it here!
The products listed below are still supported by Cytec but not recommended for any new designs
VXI C sized Boards and Switches
- Variety of Modules
- Limited support
- Register or Message based
- Matrix, Mux or Power Configurations
- Support to be discontinued by 2025
VME B sized Boards and Switches
- Variety of Modules
- Limited support
- Register or Message based
- Matrix, Mux or Power Configurations
- Support to be discontinued by 2025
PC Boards and Switches
- ISA and PCI Bus
- Limited support
- Limited configurations
- No plug and play drivers available
- Support to be discontinued by 2025